Cabinet Repair & Hinge/Drawer Replacement in Calgary, AB:

Fix What's Broken Without Replacing What Isn't

Opening Hook

Here's a question worth asking yourself before you spend another dollar on your kitchen: is your cabinet actually broken — or is one $12 hinge doing all the damage?

Nine times out of ten, a door that sags, slams, won't close flush, or has quietly separated from the frame isn't a sign your cabinets are failing. It's a sign one small, cheap, easily replaced part has worn out. Same story with drawers that stick, drop, wobble, or have fully come off their tracks.

And yet — call the wrong company, and somehow a worn-out hinge turns into a conversation about "maybe it's time to think about new cabinets altogether."

No. It isn't. Not yet, anyway.

If your cabinet boxes and doors are structurally sound, the fix is almost always small, fast, and cheap. You just need someone who'll tell you that instead of upselling you.

What Cabinet Repair Actually Covers

This isn't a vague "handyman" call. Our cabinet repair and hardware replacement service in Calgary covers the specific, common failure points that make a kitchen feel broken down even when it isn't:

  • Hinge replacement and adjustment — including upgrading old hinges to modern soft-close hinges
  • Drawer slide/glide repair and replacement — sticking, dropping, off-track, or fully failed drawer boxes
  • Door realignment — doors that no longer sit flush, gap unevenly, or won't latch
  • Drawer box repair — reinforcing or rebuilding drawer boxes with split joints or broken bottoms
  • Loose or stripped hardware repair — pulls, knobs, and handles that wiggle, spin, or have pulled out of the wood
  • Shelf and shelf-pin repair — sagging shelves, broken pins, missing supports
  • Cabinet door and drawer front reattachment — doors or fronts that have come loose or fully detached
  • Minor structural tightening — loose face frames, separated joints, cabinet boxes that have shifted

If it's a specific, identifiable problem with a cabinet or drawer — rather than the whole kitchen looking dated — this is the right service, not a full remodel and not even refacing.

Why Calgary Homeowners Call Us Before Calling a Remodeler

1. You'll spend hundreds, not thousands. Most hinge, drawer, and hardware repairs are a fraction of the cost of refacing — and a rounding error compared to full replacement. You fix the actual problem, not the whole kitchen.

2. Most repairs are done in a single visit. No multi-week project, no living out of a cooler. In most cases, we diagnose and fix on the same appointment.

3. We'll tell you if it's not worth fixing. Sometimes a drawer box is too far gone, or hinges are for a discontinued cabinet line and hardware is unavailable. When that's the case, we say so — and point you toward refacing or replacement instead of quoting an expensive repair that won't hold.

4. Soft-close upgrades, done right. A huge share of our repair calls turn into "while you're here, can you upgrade these to soft-close?" Yes — and it's one of the highest-satisfaction, lowest-cost upgrades a kitchen can get.

5. We work on all cabinet types and ages. Builder-grade, custom, big-box, older Calgary home cabinetry from decades past — if it's a hinge, slide, or hardware issue, we've almost certainly seen and fixed it before.

Who This Service Is Perfect For

  • A door or drawer is sagging, sticking, slamming, or won't close properly
  • Hardware has come loose, stripped out, or broken off
  • You want to upgrade old hinges to modern soft-close hardware without a full remodel
  • One or two cabinets took damage (water, impact, wear) but the rest of the kitchen is fine
  • You're a landlord or property manager handling wear-and-tear repairs between tenants
  • You're preparing to sell and want small, high-visibility fixes handled before showings


When Repair Isn't the Right Call

If most of your cabinet boxes are water-damaged, the doors are outdated across the whole kitchen, or you're looking at more than a handful of individual repairs, patching things one hinge at a time stops making financial sense. At that point, refacing typically delivers more value per dollar. We'll tell you straight which side of that line your kitchen is on — during a free assessment, before you pay for anything.

Our Calgary Cabinet Repair Process

Step 1 — Diagnosis. Tell us what's wrong — sagging door, broken drawer, loose hardware — or we'll do a quick on-site check to identify every failure point, not just the obvious one.

Step 2 — Straight Quote, No Surprises. You'll know the cost before we touch a single hinge. No "while we were in there" add-ons sprung on you afterward.

Step 3 — Repair or Replace the Failed Part. Hinges, slides, hardware, and joints are repaired or replaced with quality components built to outlast what failed.

Step 4 — Adjustment & Test. Every door and drawer is adjusted, aligned, and tested — opened and closed repeatedly — before we call the job done.

Step 5 — Walkthrough. We show you the fix and make sure it's right, in front of you, before we leave.

The Calgary Cabinet Repair Guarantee

Repairs are warrantied in writing — parts and labor. If a hinge or slide we install fails prematurely, we make it right. You'll know exactly what's covered before the work starts.

FAQs

How much does cabinet hinge or drawer repair cost in Calgary?

Most single hinge or drawer slide repairs cost significantly less than refacing or replacement — often in the range of a single service call plus parts. Because pricing depends on hardware type, cabinet age, and how many items need attention, we provide a straight quote before any work begins rather than a guess over the phone.

Can you match hinges and slides to my existing cabinets, even if they're older?

In most cases, yes. We carry a range of common hinge and slide types and can often source compatible replacements even for older or discontinued cabinet lines. If an exact match isn't available, we'll walk you through the closest equivalent options before proceeding.

Can you upgrade my old hinges to soft-close without replacing my cabinets?

Yes — this is one of our most requested upgrades. Soft-close hinges and drawer slides can typically be retrofitted onto your existing cabinet doors and boxes without any refacing or replacement work.

How long does a typical cabinet repair take?

Most hinge, drawer, and hardware repairs are completed in a single visit, often within an hour or two depending on how many items need attention.

My drawer completely fell off its track — is that repairable, or do I need a new cabinet?

In the large majority of cases, this is a drawer slide or track issue, not a sign the cabinet itself has failed. We can typically repair or replace the slide and get the drawer functioning properly again in the same visit.

Should I repair my cabinets or look into refacing instead?

 If the issues are limited to specific hinges, drawers, or hardware and the rest of your kitchen looks the way you want it to, repair is the faster and cheaper option. If most of your doors look dated on top of having mechanical problems, refacing usually delivers better long-term value. We'll give you an honest recommendation during your free assessment either way.

Do you serve areas outside Calgary?


Yes, we serve homeowners throughout Calgary and surrounding communities.